EMS Sculpting slimming machine is used for body shaping, reducing fat, increasing muscle, and introducing the advantages and principles of EMS machines.

Article source: https://www.litonlaser.com/ems-body-sculpting-non-invasive-weight-loss-and-muscle-gaining-machine/

The more muscles you have, the faster you burn fat. Why can muscular men become fat and thin? That’s because they absorb energy well and consume a lot of calories. Muscle mass is proportional to consumption. The more muscles you have, the more calories you consume. Therefore, muscular men can consume energy at any time, even when they sleep, they consume more than you do when you exercise. If you want to develop a physique that is easy to lose weight, you have to increase your muscles.

EMS (Electrical Muscle Stimulators) Sculpting is a highly efficient technology that can simultaneously enhance muscle and burn fat, while keeping surrounding tissues unaffected. It uses high-intensity focused electromagnetic wave energy, referred to as HI-EMT technology, to generate unique electromagnetic energy that stimulates super-strong muscle contraction through the skin and promotes fat cell metabolism, thereby reducing fat and adding new muscle. Each treatment only takes 30 minutes, and each HI-EMT treatment is equivalent to about 20,000 muscle contractions. Equivalent to running 5 kilometers.

EMS Sculpting is commonly seen in gyms and beauty salons. It can tighten, regulate and strengthen muscle groups, including upper arms, thighs and calves, and can achieve the effects of fat loss, muscle gain and body shaping.

1. The working principle of EMS Sculpting machine.

EMS Sculpting uses high-intensity focused electromagnetic wave (HIFEM) technology to stimulate the motor neurons of the human body and make the muscles do extreme training, thereby achieving muscle growth and fat loss. This excitatory effect is highly selective. Due to the physiological characteristics of muscle tissue, only motor neurons are activated, while other neurons or tissues do not respond to the current and are therefore not affected.

2. EMS Body Sculpting treatment principle.

EMS Sculpting uses high-intensity focused electromagnetic wave technology to stimulate the motor neurons of the human body and make the muscles do extreme training, thereby achieving muscle growth and fat loss.

2.1 Muscle growth principle.

Using high-intensity focused electromagnetic field technology → through nerve stimulation → continuous expansion and contraction of autologous muscles → extreme training → deep remodeling of muscles → growth of myofibrils (muscle enlargement) → production of new collagen chains and muscle fibers (muscle hyperplasia) → thereby training and increasing muscle density and volume.

2.2 Weight loss principle.

Using focused magnetic resonance (HIFEM) technology → 100% extreme muscle contraction → can trigger a large amount of fat decomposition → fatty acids are decomposed and discharged from triglycerides → a large amount of accumulation in fat cells → excessive fatty acid concentration → fat cell apoptosis → excreted by normal metabolism within 2-4 weeks, so magnetic slimming treatment can achieve fat reduction while strengthening and increasing muscles.

3. Advantages of EMS muscle Sculptor.

3.1 High efficiency.

EMS Sculpting uses high-intensity focused electromagnetic field technology to stimulate muscles to do “supercontraction” exercises. Each treatment only takes 30 minutes, and the pulse energy can stimulate the muscles to contract 20,000 times. Studies have shown that the best effect and treatment experience are achieved after four treatments.

3.2 Deep exercise.

The effective penetration depth of EMS Sculptor is 8CM, which can cover the entire neuron and drive the contraction of the entire muscle layer. The effects of “fat apoptosis” and “muscle supercontraction” are something that physical exercise can never achieve.

3.3 Compound effect.

The EMS Sculpting machine can directly get beautiful lines while removing fat and plasticizing muscles. It can solve common postpartum problems such as loose abdominal muscles and “abdominal rectus muscle separation”.

3.4 High return on investment.

EMS Sculpt is easy to operate, and the doctor only needs to operate it for less than 10 minutes each time, and the treatment process does not need to be monitored by the operator. Low labor costs and high return on investment.

3.5 Comfortable and non-invasive.

Body Sculpting treatment is highly comfortable, non-surgical, non-invasive and does not require a recovery period.

4. The therapeutic function of EMS Sculpting.

4.1 Muscle-enhancing effect.

HI-EMT uses a specific range of frequencies that do not allow muscle relaxation between two stimulations. The muscles are forced to remain contracted for several seconds. When repeatedly exposed to these high-load conditions, the muscle tissue is stressed and forced to move. Studies have shown that one to two months after HI-EMT treatment, the average thickness of the patient’s abdominal muscles increased by 15%-16%.

4.2 Fat-reducing effect.

Several recent studies using CT, MRI and ultrasound assessments reported that the subcutaneous fat layer in patients treated with HI-EMT-based devices in the abdomen was reduced by about 19%. The principle of apoptosis induced by increased free fatty acid concentrations has been observed and confirmed in many studies.

4.3 Strengthen abdominal muscles and shape the vest line.

EMS Sculpting uses high-intensity focused electromagnetic energy technology, which stimulates 20,000 strong muscle contractions when applied to the abdomen. This super muscle movement can increase the density and volume of abdominal muscles and decompose and eliminate abdominal fat.

4.4 Lift the buttocks curve and create a peach buttocks.

When EMS Body Sculpting acts on the buttocks, the powerful energy pulses cause the buttocks muscles to contract continuously. The muscles gradually increase and thicken in this “super muscle movement”, the buttocks are lifted as a whole, the muscle relaxation is significantly reduced, and the entire buttocks line becomes more and more obvious.

5. The treatment process of the EMS Sculptor machine.

• There is no need to take off clothes or apply gel during the whole treatment. Just lie on the bed and place the muscle pacemaker on the treatment area, and it can be completed in 30 minutes.
• Energy from 0 to 100%. It is generally recommended that the energy be 20-40% in the first ten minutes, increase to 70% in the second ten minutes, and 90-100% in the third ten minutes.
• The treatment is non-invasive, painless, and has no recovery period, and does not sweat.

6. EMS Sculpting machine core technology.

1. HI-EMT high-energy focused electromagnetic wave training can achieve a non-surgical fat reduction method of burning fat while lying down. Whether it is 6-pack abs or lifting peach buttocks, HI-EMT is your best choice.
2. Patented freezing system, continuous water cooling technology can prevent the treatment head from generating high temperature, balanced output, and better effect.
3. Provide a series of different muscle contraction exercises, which can be treated with up to 7.0 Tesla/300us for 30 minutes, which is equivalent to squeezing core muscle exercises for more than 5.5Hrs.

7. FAQs of EMS muscle sculpting equipment.

Q: Why is it said that one abdominal BTL is equivalent to 20,000 crunches?
A: Because in the BTL improvement process, high-intensity focused electromagnetic field technology HIFEM is used. The energy pulse can stimulate 20,000 strong muscle contractions and accelerate fat metabolism, which is equivalent to real exercise to reduce fat.

Q: How long is the treatment interval of EMS Sculpting?
A: A normal EMS Sculpting machine treatment takes 30 minutes. Generally, there are 4 treatments in a course, and the interval between each improvement is 2-3 days. It is recommended to do 4-5 courses a year to keep a fit body.

Q: What will you feel after using EMS Sculpting?
A: After experiencing the whole process, you can feel that the muscles are grabbed by a stream of energy again and again, which is a bit like being electrocuted, but it doesn’t hurt. After the treatment, the improved part may feel sore, which is a slight muscle fatigue, similar to the sour feeling after exercise. This is a manifestation of the effect after the improvement, and the body will feel well exercised. Subsequent treatments will be more adaptable and relaxed.

Q: How long will it take for EMS Sculptor to see the muscle effect? ​​Will it rebound?
A: Generally, the effect can be seen after one course of treatment, and muscle lines will appear. After 3-4 courses of continuous improvement, you can feel the gradual formation of muscles under the fat. With low body fat, you can easily have healthy lines such as vest lines. Of course, you also need to pay attention to a healthy diet, just like exercise, there will be no rebound.

Q: Is the EMS Sculpting machine dangerous?
A: EMS Sculpting is a body control machine with a certain intensity, so you need to choose genuine equipment to operate it, set the energy reasonably, operate professionally, and there is no risk.

Q: How long does EMS sculpting last?
A: After the EMS sculpting machine treatment, muscle gain and fat loss will continue for 6 months. At this time, you need to control your diet and strengthen exercise to maintain the effect of body shaping.

Q: Does EMS work on belly fat?
A: Very effective! Our EMS weight loss machine has four handles, one of which is specially for the abdomen. The improvement of abdominal fat we tested is very effective and obvious.

8. How to choose an excellent EMS body shaping machine?

As a beauty machine supplier, Litonlaser produces machines with various functions, including weight loss equipment. We have vacuum negative pressure machines, radio frequency fat blasting equipment, cryolipolysis, and EMS Sculpting body control machines.

To judge whether an EMS Sculpting machine is high-quality, we can consider many aspects such as size, number of handles, energy intensity, mode, etc. The larger the machine, the more parts it has, and the faster the machine operates. The standard number of handles is four, which can adapt to multiple parts of the body. In addition to four handles, our Litonlaser EMS body shaping machine is also equipped with a massage pad, which is used to improve and control the buttocks muscles.

If you need to know more about EMS sculpting machines, please consult our Litonlaser beauty machine manufacturer website.